Catenary Stepping Q48 Monorail Shot Blasting Machine For Casting Forging Parts

Catenary Stepping Q48 Series Monorail Hook Type Shot Blasting Machine For Casting Forging Parts

Product description

Catenary shot blasting machine is a single-stroke catenary continuous shot blasting equipment. It has static loading and unloading

of workpieces, automaticfast conveying and positioning, and rotary shot blasting of workpieces. The wholemachine is controlled by

conventional electric appliances, and the conveying trackof the workpiece is steplessly adjusted. It is suitable for all- round blast

cleaning oflarge quantities, cast steel, cast iron, and welded parts, and can be used for varioustypes of hanging workpieces. Through

shot blasting, not only the rust on the surface of the workpiece can be removed, the welding slag on the structural parts can be 

removed, but also the welding stress of the workpiece can be eliminated, the fatigueresistance of the workpiece can be improved,

and the adhesion of the paint filmwhen the workpiece is sprayed, and finally reached The purpose of improving theentire workpiece

surface and internal quality. Widely used in metallurgy, petroleum,chemical, machinery and other industries.

Advantage

1.The corresponding spreader can be made according to the parts of differentspecifications, and the cleaning time can be adjusted
by the electronic controlsystem.Complete the cleaning of different parts, with strong adaptability.

2. Adopt new advanced lifting, separation and spiral new technology, high component performance. Compact and safe overall

structure Easy installation anddisassembly, can effectively remove dust, separate unwanted small-grain steel grit,store useful

Eligible steel shot.

3. The equipment is under centralized control. It is equipped with "manual" and

" automatic" working state switching functions. Electric cabinet The panel is providedwith process display and sound and light
alarm devices. When there is a fault, it willautomatically alarm and display the fault location.

4. In order to facilitate debugging and maintenance, the machine can be operatedmanually. A series of interlocking functions are
set in the control.

Yes, it is necessary to start the equipment completely in order to protect the equipment from malfunctioning. Will not be

misunderstoodThis will cause the shotto clog and damage the shot blaster.

The technical features of this machine:

1. Adopt the most advanced direct coupled blast wheel technology(Cooperative R & D with Germany Thyssenkrupp, patent number: ZL 2015 2 0702933.5)
2. 3D designed blasting angle, side blast wheel make sure the front and back end face incident angle achieve 35°, which can completely clean complicated structures.

3. Wear resistant parts for Blast wheel adopt investment casting Cr28% technology, the lifetime is 3 times of ordinary sand casting chromium material.

4. Abrasive control unit use the new R&D KC90 pneumatic Plug-in technology.