|Blast Wheel Wear Parts Material:||High Chromium Casting Cr27%||Blast Wheel Impeller:||Abrasive-resistant Alloy Carburizing Parts|
|Bearing Of Blast Wheel:||Swenden SKF||Motor Of Blast Wheel:||Siemens Company Product|
|Reducer:||Jiangsu Guomao Group(Chinese Famous Brand)||Contactor:||Schneider|
|PLC:||Siemens||Pneumatic Components:||Yadeke Series|
Cr27% Rubber Belt Shot Blasting Machine,
Brake Pad Cleaning Shot Blasting Machine,
Tracking Tumble Airless Shot Blaster
Steel belt shot blasting machine workshop site
1.Compact,fully assembled tumble belt automatic shot blasting machine:
3.Shot blasting room was welded by durable steel frame and steel plate.
In order to prevent the abrasive directly hit the blasting chamber: The main
blasting area of shot blasting chamber lining with imported Swedish high
wear-resistant protective plate, which has a long service life.
4.The blast wheel is a key component in various shot blasting equipment,
and is widely used in the surface cleaning and pretreatment of castings,forgings,
welding parts,heat treatment parts,and surface strengthening processes of gears,
springs and other mechanical parts.
15Gn series steel belt shot blasting machine is used to remove the sticky sand, rust layer
and scale, burr on thesurface of castings, forgings and other workpieces that are easy to
roll and fall, non-brittle parts that are not easy to be crushed, and the surface of the casting
is not deep. Due to its good protection measures, strong shot blasting performance, and
reasonable circulation system structure, it can also achieve satisfactory results for difficult
|Payment term||30% deposit by T/T,the balance paid before delivery|
|Delivery time||Within 20-60 days according to different type equipment.|
1.Wide application,easy to install and use.
2.Customized.Meet your needs.
|3.Good stability.Low failure rate(technical maturity,technical precipitation,skill workers)|
4.Exquisite appearance(mature craft)
5.Large factories.Prompt delivery.
|6.Strict quality inspection department.|
|7.Factory direct selling with competitive price.|
|8.Over 10 years' production experience.|
9.Professional design team to serve you.
|10.Main electrical control sysytem adopts international brand.|
|11.CE certificate assure you our quality.|
This machine is mainly composed of cleaning room, blast wheel, pneumatic lifting door,
Pneumatically controlled abrasive gate valve, Pneumatic control system, automatic
loading and unloading system, elevator, screw conveyor,separation system,electrical
system and other parts.
We use Swedish imports (HARDOX HD600) for the material of the shot blasting room
guard and the door guard.The wear resistance is good, which saves a lot of maintenance
costs and man-hours, and achieve maximizes benefits.
Steel belt is connected by track shoe, and the material is wear-resistant high manganese
steel. The two ends of the track shoe are bolted to a chain link. The chain link is made of
carburized and hardened surface of 20CrMnMo alloy steel, and the chain link is connected
by steel pins. The driving device (3kw motor direct connection type) forces the steel belt
to run by chain drive. The two ends of the track cavity are equipped with end plates made
of steel plates, and wear plates are installed inside the end plates. Bearing housings
mountedoutside the chamber wall should be sealed and filled with grease to support the
end discs. The end plate can be adjusted in various directions.Reinforcement ribs are
fixed on both sides of the room to prevent deformation of the room.
After years of research and development and technical cooperation with German
companies, the company has manufactured a high-power direct-connected curve type
7.5-75Kw high-efficiency blast wheel, breaking the monopoly of high-power direct-connected
blast wheel technology in Europe and America. The blast wheel is a key component in
various shot blasting equipment, and is widely used in the surface cleaning and pretreatment
of castings, forgings, welding parts, heat treatment parts, and surface strengthening
processes of gears, spring sand other mechanical parts. This blast wheel technology is one
of the important advances in the development history of China's blast wheel.
The blast wheel also has the following characteristics:
This machine is composed of shot blasting room, blast wheel assembly, abrasive recycling
system, automatic loading system, steel belt system, dust removal system and electrical
This machine is a small cleaning equipment, which is mainly composed of cleaning room, shot blasting assembly, elevator, separator, electrical system and other parts. See Figure 1 (Table 1 indicates the name corresponding to the serial number of each part) Working principle: Add a specified number of workpieces in the cleaning room. After the machine is started, the projectiles thrown by the shot blaster at high speed will form a stream of shots, which will evenly strike the surface of the workpiece to achieve the purpose of cleaning and strengthening. The thrown projectiles and sand particles flow into the elevator and are lifted by the elevator to the separator for separation. The dust is sucked by the fan and sent to the dust collector to be filtered. The clean air is discharged into the atmosphere. The dust on the cloth bag is mechanically shaken and falls into the dust box at the bottom of the dust collector. The user can clean it regularly. The waste sand flows out from the waste pipe. Can be reused. The shot-sand mixture is retracted into the chamber by the reuse tube, and is reused after the separator is separated. The clean shots enter the shot blasting device through the electromagnetic supply gate to throw the workpiece.
Contact Person: Amber
Tel: 0086 13656393699