Rotary Mesh Table Shot Blasting Machine,
Gare Cleaning Shot Blasting Machine,
440v Steel Shot Blaster
Rotary Mesh Table Shot Blasting Machine For Cleaning Gare And link
Rotary Mesh Table Shot Blasting Machine description
Rotary shot blasting machine is mainly suitable for the production of surface cleaning of small and medium-sized workpieces. This specification equipment is suitable for engine connecting rods, gears, diaphragm springs, etc.
|Size of cleaning chamber||mm||Ø1350*560||Ø1350*860||Ø2654*560|
|size of cleaning piece||mm||600*250*250||600*250*250||1000*500*250|
|Turn table||loading capacity||kg||400||400||1000|
|abrasive flow rate||kg/min||200||2*150||2*250|
|Lifiting amount of elevating conveyor||t/h||15||15||30|
|Separating amount of separator||t/h||15||15||30|
|Abrasive initial filling||kg||400||350||1500|
1. The rotary table shot blasting machine is mainly composed of the chamber body, the turntable, the transmission system, the separator, the elevator, the blasting device, the shot blasting device and other parts. With the best orientation, when the workpiece is turned out of the chamber with the turntable, the cleaning effect can be directly seen for the next step.
2. Drive the pill scraper to rotate through the transmission system, and send the shot sand to the lower part of the hoist through the flow shot tube, and then the hoist lifts to the separator for separation. The intact shot passes through the blast tube and the gate for continuous use by the shot blasting machine. , The broken projectiles and dust enter other corresponding pipelines separately for secondary separation.
3. The transmission mechanism of the rotary table shot blasting machine is driven by the friction wheel by the cycloid pin wheel reducer, and friction transmission occurs with the turntable through a clutch mechanism, so that the turntable rotates smoothly. When the workpiece is turned outside, it can be used to directly flip and adjust the cleaned workpiece; it can also be used to flip the clutch handle at any time according to the difference of the cleaned workpiece and the difficulty of loading and unloading the workpiece to separate the friction wheel from the turntable, that is, the turntable Stop the rotation and adjust the workpiece, then change the position of the handle, and the turntable starts to rotate again.
Qingdao KNNJOO machine Inc. is the subsidiary corporation of joint venture set up by Qingdao foundry machine CO.,LTD. and taiwan APC company, the company is mainly manufacture advanced shot blasting machine, shot blasting equipment and foundry machine. The company introduct and develop more than one hundred kinds of shot blasting machine and shot peening machine, more than 20 products filling a domestic gap in this field, the products applied to many well-known enterprises such as Thyssen Krupp, SIEMENS, FAW-Volkswagen, Cummins engine, Dongfeng Automobile,Weichai Power, Jinan heavy duty truck, China high-speed rail, Bombardier, Chery Automobile, Mercedes-Zenz, Hitachi nuclear industry, Fuji Heavy Industries, Tangshan gear, AISIN, ALSTOM, Doosan, Caterpillar and etc. And the products are exported to 49 countries around the world such as Spain, France, United States, South Korea, Japan, Singapore, Australia, Russia and etc. The company enjoy a high reputation and reputation in the world.
Contact Person: Amber
Tel: 0086 13656393699