|
Product Details:
|
| Contactor: | Schneider | PLC: | Siemens |
|---|---|---|---|
| Pneumatic Components: | Yadeke Series | Blast Wheel: | Direct-coupling High Efficiency Blast Wheel |
| High Light: | 4*180kg/Min Industrial Shot Blasting Machine,Metallic Luster Industrial Shot Blasting Machine,4*180kg/Min pipe blasting machine |
||
Wire Mesh Belt Shot Blasting Machine for oxide scale make uniform metallic luster cleaning
The mesh belt-through shot blasting machine uses a conveyor belt as the carrier of the workpiece. The conveyor belt is divided into two ways: steel mesh belt and wear-resistant rubber belt. One end of the shot blasting chamber is a loading station, and the other end is an unloading station. When working, the parts are placed on the conveyor belt at the loading station, and the conveyor belt slowly enters the shot blasting room for shot blasting cleaning, and then sent to the unloading station to remove the workpiece. The characteristics of this machine are: continuous work, no collision, suitable for small and medium parts, and large production batches. During the shot blasting operation, the shot blasted steel shot falls to the bottom of the shot blasting chamber, and is conveyed to the bottom of the elevator by the screw pusher, and then the steel shot is lifted to the top sorter by the elevator belt assembly. The sorter is powered by the dust collector to screen the recovered steel shots. The purpose is to separate the broken steel shot and dust during the shot blasting process. Through the sorter, the qualified steel shot will directly enter the storage bin above the shot blasting device, ready for reuse. The broken steel shot will be separated out and fall into the waste barrel through the bypass sand pipe. The dust is directly sucked away by the dust removal system, adsorbed on the filter cartridge in the dust removal chamber, and the dust is shaken by the pulse blowback system of the dust collector, and falls into the dust collection box. It needs to be cleaned in time (optional water dust collector: The water mist is fused at high speed and sprayed to the inner wall, flows into the dust collecting tank through the chamber body to form sludge, and then is discharged from the body through the sewage mechanism)
The complete set of equipment of this machine includes shot blasting room, auxiliary room, abrasive control unit, shot blasting system, abrasive recycling and sorting storage system, ventilation and dust removal system, mesh belt conveyor system, electrical control system, maintenance platform, safety system, etc. Mechanical and electrical systems are equipped with reliable safety protection devices. The shot blasting equipment complies with the relevant standards, certifications and requirements of EU CE, German TUV, and French BV.
The machine body is welded by steel plate and section steel, and the inner side is made of wear-resistant steel plate as the guard plate. The guard plate near the main throwing chamber is installed obliquely to the main throwing chamber.
The outer side of the wear-resistant protective plate is a dark air duct, which is used to evenly suck dust-containing gas and settle steel shots. The bulletproof door curtain adopts a sandwich wear-resistant rubber vertical curtain.
The machine is mainly composed of blast chamber, blast wheel bucket elevator, screw conveyor, separation system, mesh belt system, electrical system etc.
|
Advantage |
|
1.Wide application,easy to install and use. |
| 2.Customized.Meet your needs. |
| 3.Good stability.Low failure rate ( technical maturity,technical precipitation,skill workers) |
| 4.Exquisite appearance(mature craft) |
|
5.Large factories.Prompt delivery. |
| 7.Factory direct selling with competitive price. |
|
8.Over 10 years' production experience. |
| 9.Professional design team to serve you. |
| 10.Main electrical control system adopts international brand. |
| MOQ | 1 SET |
| Settlement Currency | USD,RMB,EUR |
| Trade mode | FOB,CIF,EXW |
| Payment term | 30% deposit by T/T,the balance paid before delivery |
| Delivery time | Within 20-60 days according to different type equipment. |
Using German technology and independent research and development technology,the technical performance of the equipment reaches the highest level in Asia. The configuration, quality and performance of this equipment can ensure that ,the technology in the industry is not behind for ten years.
This equipment is a mesh belt conveyor through type automatic shot blasting cleaning equipment, Suitable for complete, comprehensive and continuous shot blasting processing of sheet metal parts, die-casting parts, forging parts, and small and medium-sized and complex workpieces that are afraid of collision, Make it obtain a clean surface with a certain roughness, increase the adhesion of the paint film, and improve the surface quality and anti-corrosion effect. Using German technology and independent research and development technology, the technical performance of the equipment reaches the highest level in Asia. The configuration, quality and performance of this equipment can ensure that the technology in the industry is not behind for ten years.
The complete set of equipment of this machine includes shot blasting room, auxiliary
room, abrasive control unit,shot blasting system, abrasive recycling and sorting storage
system, ventilation and dust removal system, mesh belt conveyor system, electrical
control system, maintenance platform, safety system, etc. Mechanical and electrical
systems are equipped with reliable safety protection devices. The shot blasting
equipment complies with the relevant standards, certifications and requirements of
EU CE, German TUV, and French BV.
1. The shot blasting machine motor adopts ABB, excellent and controllable manufacturing process, good sealing, good dynamic balance, stable and reliable performance.
2. The shell of the shot blasting machine is made of 10mm high-quality carbon steel plate through laser cutting, precision bending and welding, and the shell is welded by a special fixture to ensure the parallelism of the two ends of the shot blasting shell and the concentricity of the holes.
3. The top guard plate is precision processed by die steel CNC, with a processing accuracy of ±0.01; low pressure vacuum heat treatment is used after machining.
4. The end guard is made of high wear-resistant manganese 13 steel plate, which is cut by laser.
5. The side guards are precision machined with die steel CNC with a machining accuracy of ±0.01; low-pressure vacuum heat treatment is used after machining.
6. The directional sleeve adopts CNC precision machining of die steel, with a machining accuracy of ±0.01, uniform wear and good dynamic balance; low-pressure vacuum heat treatment is used after machining.
7. The pill wheel is precision machined with die steel CNC, with a machining accuracy of ±0.01, uniform wear and good dynamic balance; low-pressure vacuum heat treatment is used after machining.
8. The blades are precision machined with die steel CNC, the machining accuracy reaches ±0.01, the weight difference of each blade is ±2g, uniform wear and dynamic balance; low-pressure vacuum heat treatment is used after machining.
9. The impeller is precision machined with die steel CNC, with a machining accuracy of ±0.01; after machining, low-pressure vacuum heat treatment is used, and the surface hardness can reach HRC58-62.
10. The service life of the above wearing parts: more than three times the service life of casting products (using shot material: S460 or less (1.5mm cast steel shot), hardness: HRC40-50).
Contact Person: Amber
Tel: 0086 13656393699
