0.6m3 Drum Type Shot Blasting Machine,
Workpiece Drum Type Shot Blasting Machine,
0.6m3 steel plate shot blasting machine
Tilt drum shot blasting machine for casting forging parts cleaning
Tilt drum shot blasting machine
The inclined drum shot blasting machine is one of the standard series of cleaning equipment newly developed by our company. This machine can be used to clean the workpieces that are easy to flip and fall, the non-brittle parts that are not easy to break, and the casting, forging and welding parts with not deep cores, and to remove sand and oxide scale on the surface of the workpiece. The whole machine is controlled by Siemens PLC, which has a high degree of automation. It can be used as a stand-alone machine or by wiring.
The use and characteristics of tilting roller machine
The inclined drum shot blasting machine is one of the standard series of cleaning equipment newly developed by our company. This machine can be used to clean the workpieces that are easy to flip and fall, the non-brittle parts that are not easy to break, and the casting, forging and welding parts with not deep cores, and to remove the sand and oxide scale on the surface of the workpiece. The whole machine is controlled by Siemens PLC, which has a high degree of automation. It can be used as a stand-alone machine or by wiring.
Compared with the crawler shot blasting machine, the shot blasting effect is more even and uniform, and it saves more power consumption. The tilt drum shot blasting machines manufactured by the company for Xi'an Aerospace, Ganzhou Getrag, ThyssenKrupp, Suzuki of Japan, and General Motors of the United States are well received.
CND-10, CND-I, CND-II are high-efficiency roller cleaning machines independently researched and developed by our company. This machine has high degree of automation and good cleaning effect. It can be operated as a stand-alone machine or wired. Because the workpiece to be cleaned has no relative moving parts in the rolling area of the machine, the traditional crawler shot blasting machine (32 series rubber crawler, GN series metal crawler) clamps are avoided in structure, and there are too many moving and worn parts (chain rings, pin shafts). , Track shoes, sprocket, etc.), sudden failures are frequent, such as the chain link breaks when the piece is stuck, the reducer breaks, etc.
The actual use of many customers for many years shows that compared with the crawler type shot blasting machine, the use cost of the inclined drum shot blasting machine is 1/5 of the crawler type, and the maintenance workload is 1/10 of the crawler type. The replacement product of the machine.
|1.Wide application,easy to install and use.|
|2.Customized.Meet your needs.|
|3.Good stability.Low failure rate(technical maturity,technical precipitation,skill workers)|
|4.Exquisite appearance(mature craft)|
|5.Large factories.Prompt delivery.|
|6.Strict quality inspection department.|
|7.Factory direct selling with competitive price.|
|8.Over 10 years' production experience.|
|9.Professional design team to serve you.|
|10.Main electrical control sysytem adopts international brand.|
|11.CE certificate assure you our quality.|
1 The shot blasting machine and the motor adopt the German THYSSENKRUPP ThyssenKrupp technology. Compared with the old-fashioned shot blasting machine, the friction loss is reduced. Not only the motor efficiency is greatly improved by 20%, the failure points are also fewer, and the maintenance cost is reduced by 50%. .
2 Compared with the old shot blasting machine, the volume is smaller, the angle can be arranged at will, and the maintenance is more convenient.
3 Compared with the old-fashioned shot blasting machine, the shot blasting effect is constant, and the cleaning quality will not fluctuate.
4 The blades and wear parts are made of high chromium investment casting Cr27, which has high wear resistance, and the service life is about 800-4000 hours, which is 3 times that of ordinary casting materials;
5 Shot blaster impeller: The impeller is carburized with wear-resistant alloy. The impeller body is processed at one time by a high-precision CNC machining center with high precision, ensuring the balance of high-speed operation, low vibration, low noise, and long life;
6 The bearing adopts the products of Sweden SKF;
7 The motor adopts Siemens products;
8 The Schenck dynamic balance instrument is used to ensure the high-speed dynamic balance of the impeller body;
Contact Person: Amber
Tel: 0086 13656393699