|Reducer:||Tai Lung Group Reducer||Blast Wheel:||Direct-Coupling Blast Wheel|
|Dust Collector:||Donaldson Filter Dust Collector||Chamber Guard Board:||Sweden Imported HADOX|
W1500mm Steel Shot Blasting Equipment,
l13000mm Steel Shot Blasting Equipment,
W1500mm industrial shot blasting machine
Roller conveyor type Shot Blasting Machine Direct-Coupling Blast Wheel For Steel Plate Cleaning
The Q6915 steel plate roller table through-type shot blasting machine is to perform shot blasting and derusting of the steel surface and apply a protective primer, so that after the steel is pretreated by shot blasting and derusting, the corrosion resistance of the product and metal components can be improved, and the The fatigue resistance of the steel plate extends its service life. At the same time, it can optimize the state of the steel surface process, which is conducive to the cutting and precision blanking of the CNC cutting machine. It is suitable for surface derusting, welding slag and stress, painting, etc. of steel plates, profiles and structural parts. Common steel such as angle steel, channel steel, I-beam, etc. can be processed by steel plate through shot blasting machine.
|1.Wide application,easy to install and use.|
|2.Customized.Meet your needs.|
|3.Good stability.Low failure rate(technical maturity,technical precipitation,skill workers)|
|4.Exquisite appearance(mature craft)|
|5.Large factories.Prompt delivery.|
|6.Strict quality inspection department.|
|7.Factory direct selling with competitive price.|
|8.Over 10 years' production experience.|
|9.Professional design team to serve you.|
|10.Main electrical control sysytem adopts international brand.|
|11.CE certificate assure you our quality.|
High-performance targeted surface treatment equipment for metal plates and profiles
High-speed feeding, long maintenance intervals
Special shot blasting device configuration angle, shot blasting time shortened by 5%-20%
Designed to cooperate with fully automatic production lines
Rust and descaling
KJ-C roller conveyor shot blasting machine demonstrated the highest performance of this series of models in the shot blasting of metal plates and profiles.
The main difference between this model and other products on the market is that the shot blasting device on the top of the machine is arranged at a certain angle. This arrangement reduces the accumulation of shots on longer profiles. This method can significantly increase the proportion of shot blasting energy applied to the main task (ie, derusting and descaling metal plates and profiles), and can avoid a large amount of shot material accumulation.
Shot blast angle to speed
In practice, compared with the roller conveyor shot blasting machine installed vertically, the shot blasting efficiency of the K-shaped roller conveyor shot blasting machine installed at a certain angle is 5-20% faster .
The K-type roller conveyor shot blasting machine is suitable for applications that require high passing speed and long maintenance intervals.
Suitable for sheet metal and profile
These characteristics make the shot blasting machine especially practical when integrated into a fully automated production line, and it is suitable for shot blasting of metal plates and profiles.
HD roller conveyor type shot blasting machine is mainly equipped with the latest TITAN shot blasting machine. Of course, the equipment also has many other options, such as the automatic shut-off function of the shot blaster for workpieces that cannot cover the entire width of the equipment, the adjustment function of the shot blasting mode of the external shot blaster, and the automatic separation of boring and sawdust.
Shot blasting room
The shot blasting chambers of all Chunjiu roller conveyor shot blasting machines are made of Huanda steel plate. The hardness of manganese steel is relatively large, and the acceptable shot blasting hardness ranges from 35 HR C to 50 HRC or higher.
Therefore, manganese steel has excellent shot blasting properties. In the hot spot area of the shot blasting room, a 10mm thick Huanda steel plate was added. They are connected externally and are easy to replace. When using shot blasting with strong impact force, manganese, tool steel or castings can be provided as linings.
In order to avoid the leakage of pellets, several layers of rubber pads or VSA curtains are installed in the excessively worn area, which are installed on the V-shaped track for easy replacement.
Shot cleaning device
After the shot blasting process, the workpiece may still be covered by the shot material and must be removed. The tool for cleaning shot blasting is a rotating brush, firmly fixed on the interchangeable brush handle.
In order to avoid shot blasting on the long parts, the rotating brush gently brushes the used abrasive off the surface of the workpiece and brushes it into a specially designed groove. The groove is equipped with a screw conveyor to send the medium back. To recycle. In order to keep the position of the brush and screw conveyor fixed, when the workpieces of different sizes are shot blasting, the rotating brush and screw conveyor are both set on the same adjustable frame. The frame can be adjusted manually or automatically. Within the required height range, the adjustment distance must be less than 5mm. Finally, the residual medium on the workpiece will be cleaned by a blower, which is installed on the same frame, and a high-pressure ventilator is used to blow off the residual material.
Contact Person: Sherry