|Function:||Metal Surface Cleaning||Manufacturer:||QINGDAO KNNJOO MACHINE INC.|
Load 2700kg Rebar Shot Blaster,
Wire Rods Rebar Shot Blaster,
Load 2700kg short blast machine
Steel Bar Wire Rods Rebar Shot Blasting Machine /steel cut wire
Steel Bar Wire Rods Rebar Shot Blasting Machine description
This machine is the best special equipment for cleaning coiled wire rods. It uses shot blasting to remove the wire rod surface oxide scale and the surface scale layer formed by steel rolling. After the round billet is shot blasted, its entire surface derusting grade reaches Sa2.5, and the surface roughness grade reaches Ra6.3～12.5μm. The output can reach 15 tons per hour.
|Diameter of the wire||
Φ 4～Φ 40mm
|Inner diameter of the wire rod||
|Outer diameter of the wire rod||
|Height of wire rod||
Features of the machine
1. The equipment has high efficiency, and the cleaned wire surface is clean and metallic.
2. The shot blasting machine adopts special shaped blades to focus on the shot, with high density of shots, which improves productivity.
3. The spacing between the wires by the guide can control the swing of the cleaned wires to achieve the purpose of cleaning.
4. A number of domestic and foreign advanced technologies are used to improve the technical content of functional components, so that the machine has a low failure rate and a high start-up rate. The sealing effect is good, and it reaches the environmental purification index required by environmental protection.
The front power (provided by the user) on the wire to be cleaned passes through the shot blasting chamber through the pressure wheel. Strike the surface of the passing wire to remove the oxide scale and rust layer on its peripheral surface. After cleaning, the pellets are sent to the lower part of the elevator by the screw conveyor, and the pellets are sent into the separator by the elevator, and the qualified pellets are fed into the hopper through the airflow for recycling. The unseparated mixture of pellets is returned to the shot blasting The chamber continues to circulate. After the fine rust and dust are purified by the sedimentation cylinder and the dust collector, the large particles are captured and collected, and the pure gas is discharged into the atmosphere.
Our company is an automated production enterprise for shot blasting machines, environmental protection equipment, and robots. The company has a modern scientific research center, advanced manufacturing workshops and industry-leading talents. The products include more than 100 kinds of shot blasting machines, shot blasting strengthening machines, sand blasting equipment, casting machines, dust removal environmental protection equipment and related supporting steel shot steel grit, wear-resistant accessories, etc. The company has obtained international IOS9001 certification, German TUV certification, EU CE certification, French BV certification, and has obtained the right to import and export enterprises, exporting to Germany, Spain, France, the United States, South Korea, Japan, Singapore, Australia, Russia and other 49 countries , Enjoy a high reputation and reputation in other countries and domestic.
Contact Person: Sherry