|Blast Wheel Impeller:||Abrasive-resistant Alloy Carburizing Parts||Bearing Of Blast Wheel:||Swenden SKF|
|Motor Of Blast Wheel:||Siemens Company Product||Reducer:||Jiangsu Guomao Group(Chinese Famous Brand)|
|Blast Wheel Wear Parts Material:||High Chromium Casting Cr27%||Contactor:||Schneider|
|PLC:||Siemens||Pneumatic Components:||Yadeke Series|
75m/S Automatic Shot Blasting Machine,
80m/S Automatic Shot Blasting Machine,
75m/S tumble blaster
High Quality automatic Steel Belt Tumblast Shot Blasting Machine for small castings forgings stamping parts
The crawler shot blasting machine is a high-strength wear-resistant rubber crawler or manganese steel crawler for loading workpieces. It uses a high-speed rotating impeller to throw projectiles onto the workpiece in the chamber to achieve the purpose of cleaning. It is suitable for sand removal, rust removal, scale removal and surface strengthening of small castings, forgings, stamping parts, gears, springs, etc. It is especially suitable for cleaning and strengthening parts that are not afraid of collisions.
This machine integrates domestic and foreign technology, is a kind of cleaning equipment with good cleaning effect, compact structure, low noise, and is used for surface derusting or shot blasting in large and medium batch production. It has the following characteristics:
1. It adopts cantilever centrifugal shot blasting machine, which has the characteristics of long service life and simple structure;
2. Three ejection speeds of 75 m/s, 80 m/s and 85 m/s are used.
3. The pulley adopts the internationally advanced quick-change structure, which is beneficial to improve production efficiency and reduce labor intensity.
4. The use of BE type separator has good separation effect and high productivity, and has a positive effect on improving the life of the blade;
5. Adopt bag filter, the dust emission concentration is lower than the national standard, which improves the working environment of workers;
6. This model adds some special mechanisms such as manual pill gate and discharge gate.
7. The crawler shot blasting machine of this model can be used as a stand-alone machine or by wiring.
|Payment term||30% deposit by T/T,the balance paid before delivery|
|Delivery time||Within 20-60 days according to different type equipment.|
1.Wide application,easy to install and use.
2.Customized.Meet your needs.
|3.Good stability.Low failure rate(technical maturity,technical precipitation,skill workers)|
4.Exquisite appearance(mature craft)
5.Large factories.Prompt delivery.
|6.Strict quality inspection department.|
|7.Factory direct selling with competitive price.|
|8.Over 10 years' production experience.|
9.Professional design team to serve you.
|10.Main electrical control sysytem adopts international brand.|
|11.CE certificate assure you our quality.|
This machine is mainly composed of cleaning room, blast wheel, pneumatic lifting door,
Pneumatically controlled abrasive gate valve, Pneumatic control system, automatic
loading and unloading system, elevator, screw conveyor,separation system,electrical
system and other parts.
We use Swedish imports (HARDOX HD600) for the material of the shot blasting room
guard and the door guard.The wear resistance is good, which saves a lot of maintenance
costs and man-hours, and achieve maximizes benefits.
Steel belt is connected by track shoe, and the material is wear-resistant high manganese
steel. The two ends of the track shoe are bolted to a chain link. The chain link is made of
carburized and hardened surface of 20CrMnMo alloy steel, and the chain link is connected
by steel pins. The driving device (3kw motor direct connection type) forces the steel belt
to run by chain drive. The two ends of the track cavity are equipped with end plates made
of steel plates, and wear plates are installed inside the end plates. Bearing housings
mountedoutside the chamber wall should be sealed and filled with grease to support the
end discs. The end plate can be adjusted in various directions.Reinforcement ribs are
fixed on both sides of the room to prevent deformation of the room.
After years of research and development and technical cooperation with German
companies, the company has manufactured a high-power direct-connected curve type
7.5-75Kw high-efficiency blast wheel, breaking the monopoly of high-power direct-connected
blast wheel technology in Europe and America. The blast wheel is a key component in
various shot blasting equipment, and is widely used in the surface cleaning and pretreatment
of castings, forgings, welding parts, heat treatment parts, and surface strengthening
processes of gears, spring sand other mechanical parts. This blast wheel technology is one
of the important advances in the development history of China's blast wheel.
The blast wheel also has the following characteristics:
This machine is composed of shot blasting room, blast wheel assembly, abrasive recycling
system, automatic loading system, steel belt system, dust removal system and electrical
15Gn series steel belt shot blasting machine is used to remove the sticky sand, rust layer and
scale, burr on the surface of castings, forgings and other workpieces that are easy to roll and
fall, non-brittle parts that are not easy to be crushed, and the surface of the casting is not deep.
Due to its good protection measures, strong shot blasting performance, and reasonable
circulation system structure, it can also achieve satisfactory results for difficult-to-clean workpieces.
This machine is composed of shot blasting room, blast wheel assembly, abrasive recycling system,
automatic loading system, steel belt system, dust removal system and electrical control part.
After adding a specified number of workpieces in the shot blasting chamber, the pneumatic door is
automatically closed, the machine is started, the workpiece is driven by the drum, and it starts to flip.
At the same time, the abrasives thrown out by the blast wheel form a fan-shaped beam, which evenly
strikes the workpiece surface.The thrown abrasives and grit flow from the small holes on the steel
belt into the screw conveyor at the bottom, and are conveyed into the elevator, which is transported
by the elevator to the separator for separation. Dust-containing gas is sucked into the dust collector
by the fan for filtering, and then becomes clean air, which is discharged into the atmosphere. The
dust is blown back into the dust collection box at the bottom of the dust collector by air, and the user
can remove it regularly. Waste sand flows out of the waste pipe and can be reused.The shot and
sand mixture is recovered into the chamber through a recovery tube, and reused after the separator
is separated; the clean abrasive enters the blast wheel through the abrasive gate and throws the workpiece.
Contact Person: Anna