1350*860mm Airless Shot Blaster,
Diaphragm Spring Airless Shot Blaster,
1350*860mm airless shot blasting machine
ZT Series airless shot blasting machine for cleaning Diaphragm spring
ZT Series airless shot blasting machine description
The key component of the KNNJOO desktop shot blasting machine is the turntable used to process the workpiece. This type of equipment is most suitable for processing symmetrical parts. The turntable can also be positioned at a certain angle and cooperate with several multi-point positioning heads to achieve Processing of asymmetrical parts. Knnjoo has developed a variety of turntable shot blasting machines to meet the needs of customers for material turnover. In addition to the traditional fixed turntable shot blasting machine, there are also shot blasting machines with one or two moving turntables. This type of equipment allows new parts to be loaded while processing other parts, thereby reducing processing time
|Size of cleaning chamber||mm||Ø1350*560||Ø1350*860||Ø2654*560|
|size of cleaning piece||mm||600*250*250||600*250*250||1000*500*250|
|Turn table||loading capacity||kg||400||400||1000|
|abrasive flow rate||kg/min||200||2*150||2*250|
|Lifiting amount of elevating conveyor||t/h||15||15||30|
|Separating amount of separator||t/h||15||15||30|
|Abrasive initial filling||kg||400||350||1500|
1. The rotary table shot blasting machine is mainly composed of the chamber body, the turntable, the transmission system, the separator, the elevator, the blasting device, the shot blasting device and other parts. With the best orientation, when the workpiece is turned out of the chamber with the turntable, the cleaning effect can be directly seen for the next step.
2. Drive the pill scraper to rotate through the transmission system, and send the shot sand to the lower part of the hoist through the flow shot tube, and then the hoist lifts to the separator for separation. The intact shot passes through the blast tube and the gate for continuous use by the shot blasting machine. , The broken projectiles and dust enter other corresponding pipelines separately for secondary separation.
3. The transmission mechanism of the rotary table shot blasting machine is driven by the friction wheel by the cycloid pin wheel reducer, and friction transmission occurs with the turntable through a clutch mechanism, so that the turntable rotates smoothly. When the workpiece is turned outside, it can be used to directly flip and adjust the cleaned workpiece; it can also be used to flip the clutch handle at any time according to the difference of the cleaned workpiece and the difficulty of loading and unloading the workpiece to separate the friction wheel from the turntable, that is, the turntable Stop the rotation and adjust the workpiece, then change the position of the handle, and the turntable starts to rotate again.
Contact Person: Sherry